| GAUGE ISOLATOR VALVE 2, 3 & 4 STATION |
2 Station, 3 Station and 4 Station mult circuit gauge isolator valves are most ideal for use where 2,3 & 4 circuit pressures to be read by a common gauge. Using one gauge to read many circuits reduces instrument cost. Excellent performance available due to separate chamber for each circuit pressure. Easy to operate even at high pressure. |
| OPERATION |
By pusing one of the valve knobs allows the fluid in that particular circuit only to flow around the spool connecting pressure port P to gauge port G. When the knob is released the spool is spring returned to the closed position, thus allowing the fluid to drain from guage to common take port T. |
| SPECIFICATION |
All ports ¼” BSP female thread. High graded cast iron body. Hardened, ground, lapped and balanced spool made out of high carbon steel. Nitrile seal. Maximum working temperature 30dC – 80dC, Maximum working pressure 0 to 3000 psi. Maximum allowable leakage through tank port 3 to 4 cc per minute. (This lekage does not effect any pressure drop in the system.) |
| |
 |
| |
| DIMENSIONAL DETAILS |
| PART NO |
MODEL |
A |
B |
C |
H |
X |
Y |
S |
T |
| 2120 |
2S - GIV - PR |
30 |
65 |
15 |
100 |
80 |
40 |
105 |
60 |
| 2140 |
3S - GIV - PR |
30 |
95 |
15 |
100 |
110 |
40 |
135 |
60 |
| 2160 |
4S - GIV - PR |
30 |
125 |
15 |
100 |
140 |
40 |
165 |
60 |
|
| |
